Flex Coat High Build is the original formula, just as it has always been. An excellent finish for all types of fishing rods.

Direct from the USA, this two-component varnish gives you excellent quality results. The high build flexcoat is perfect for all types of fishing requiring higher than average strength (exotic fishing, predator fishing, exotic lures, etc.).

Recommendations

We strongly recommend that you use a 50/50 volume ratio and mix the resin part A and the hardener well to obtain a good quality varnish.

Epoxy varnishes can crystallise in the cans before use.
This is often due to the cold during transport.
Simply apply heat:
Either in the microwave, bottle open, once or twice for 5 seconds.
Or in a bain-marie.
Don’t mix the varnish when it’s too hot, as the pot-life will be too short to varnish a whole rod.