Bonafide XTR140P Fishing Kayak Motor-Ready Power Meets Pedal-Drive Precision

The Bonafide XTR140P is a 14-foot fishing kayak purpose-built for anglers who refuse to choose between coverage and control. Motor-ready straight from the factory and optionally equipped with Bonafide’s X-Range Pedal Drive, the XTR140P lets you run a motor to cover water fast, then drop the pedals to work a school quietly, hold position in current, or fight a fish to the boat without ever putting your rod down.

At 40 inches (101.6 cm) wide with 725 pounds (328.9 kg) of capacity, the XTR140P delivers the deck-standing stability of a bass boat in a package that launches anywhere a kayak can. The 24″ x 80″ (61 x 203.2 cm) open walkable floor plan and 22″ x 33″ (55.9 x 83.8 cm) elevated bow casting platform give you room to move, sight-fish, and work every angle. An efficiency-optimized open-water hull handles tough conditions with 14 oversized drainage scuppers shedding water fast.

Rigging flexibility runs bow to stern: multiple transducer mounting options at the midship scupper and stern, monitor mount locations at the side rail and forward deck, and Power Link install points at the bow, midship, and stern for clean electronics wiring. The Pivot Pro swivel seat rides a 42-inch (106.7 cm) adjustable track and even converts the XTR140P to a tandem angler setup. Whether you choose the motor-only configuration or add the X-Range Pedal Drive with integrated hand steering and remote rudder control, the XTR140P handles whatever you decide to fish and never asks you to choose how.

Bonafide XTR140P Specs

Length: 14′ 0″ (4.27 m) Width: 40″ (101.6 cm) Depth at Beam: 18″ (45.7 cm) Capacity: 725 lbs (328.9 kg) Fitted Hull Weight: 170 lbs (77.1 kg) Fully Rigged Weight: 185 lbs (83.9 kg) Propulsion: Motor-ready from the factory; optional X-Range Pedal Drive with hand steering

Bonafide XTR140 Features

• Two Ways to Fish, One Boat: Run a motor to cover water quickly, then deploy the optional X-Range Pedal Drive to hunt fish quietly, hold on a school, or fight a fish hands-free you never have to commit to just one style.
• Stand and Fish with Confidence: High-stability hull design and strong forward capacity let you stand, walk, and cast from anywhere on the deck, even in choppy open water.
• Room to Move All Day: The 24″ x 80″ open walkable floor plan keeps your footing clear from seat to bow, so repositioning for a cast never means climbing over gear.
• Elevated Sight-Fishing Platform: The 22″ x 33″ upper deck standing platform gives you a raised vantage point to spot cruising fish and make precise casts.
• Swivel Seating That Adapts to You: The Pivot Pro swivel seat rides a 42″ adjustable track, letting you face your fight in any direction and even convert the boat to a tandem angler setup.

• Storage for Every Trip Length: High-volume 24″ x 15″ x 9″ below-deck storage, a 13″ x 15″ gasketed bow hatch built to shed waves, and dedicated X-Range stowage under the deck platform and at the stern keep everything secure and within reach.
• Built for Tough Conditions: An open-water hull design and 14 oversized drainage scuppers shed rough water fast, so wind and waves don’t cut your day short.
• Midship Grab Rail System: Drop in sonar, add rigging, or stow rods along the rail a versatile mounting backbone that keeps your most-used gear at arm’s reach.
• Rig Your Electronics Your Way: Multiple transducer mounts at the midship scupper and stern, monitor mount locations at the side rail and forward deck, and Power Link install points at bow, midship, and stern make for clean, flexible fish-finder setups.
• Steering That Matches Your Setup: Integrated hand steering for the pedal drive, foot-steering capability for stern motors, and the integrated SpringBlade rudder system keep you in control no matter how you’re propelled.

• Open water hull design built for tough conditions
• High stability and forward capacity for deck standing
• Efficiency optimized hull for pedal drive and motor drives
• X-Range Pedal Drive system with remote steering 2 storage options
• Integrated SpringBlade rudder system
• Pivot Pro swivel seat on 42″ adjustable track

• 22″ x 33″ wide upper deck standing platform
• High volume 24″ x 15″ x 9″ below deck storage
• X-Range storage location under deck platform
• Long term X-Range storage at the stern
• Midship grab rail system for drop in sonar or rigging and rod storage
• Multiple transducer mounting options at the midship scupper and stern
• Multiple monitor mount locations at side rail and forward deck

• 24″ x 80″ open walkable floor plan
• Power Link install locations for electronics rigging bow/mid/stern
• 13″ x 15″ gasketed internal storage bow hatch built to shed waves
• 14 OS drainage scuppers for tough conditions
• Foot steering capable for stern motors
• Hand steering integrated for pedal drive
• Convertible to tandem angler setup with Pivot Pro swivel

Frequently Asked Questions About the Bonafide XTR140P Fishing Kayak

What type of angler and water is the Bonafide XTR140P built for?

The Bonafide XTR140P Fishing Kayak is a big-water fishing platform for anglers who cover distance and fish standing. At 14 ft long and 40 in wide with a 725 lb capacity, an efficiency-optimized open-water hull and 14 oversized drainage scuppers, it suits lakes, reservoirs, larger rivers and protected inshore water. It is not a creek boat: a shorter hull such as the Bonafide XTR130, at 12 ft 7 in, turns more readily in tight water.

How does the Bonafide XTR140P handle and steer?

The Bonafide XTR140P Fishing Kayak runs an efficiency-optimized open-water hull designed around pedal and motor drives rather than outright paddling speed, and its integrated SpringBlade rudder does the steering. Control changes with the setup: hand steering is integrated for the X-Range Pedal Drive, and the hull is foot-steering capable for stern motors. The 14 ft waterline holds a line in wind and chop, while the 40 in beam trades some speed for the deck stability that comes with it.

How stable is the Bonafide XTR140P for standing and casting?

The Bonafide XTR140P Fishing Kayak is built around fishing on your feet. A 40 in beam and 18 in depth at the beam carry a 24 in x 80 in open walkable floor plan that runs clear from the seat to the bow, and a 22 in x 33 in elevated upper deck platform gives a raised vantage point for sight-fishing. Standing still depends on your own balance, how the kayak is loaded and what the water is doing that day. Try it in shallow, calm water close to shore first.

What does the 725-pound capacity of the Bonafide XTR140P include?

The 725 lb capacity of the Bonafide XTR140P Fishing Kayak covers everything the hull carries: your own body weight plus the seat, paddle, PFD and safety gear, tackle, cooler, and the X-Range Pedal Drive, motor, battery and mounting hardware if you add them. It is not an allowance for gear alone. On a hull rigged for both pedal and power the propulsion weight adds up quickly, so total what you actually intend to carry and leave margin under the rating.

What is included with the Bonafide XTR140P, and what is sold separately?

The Bonafide XTR140P Fishing Kayak comes in two configurations. Both ship with the hull, the Pivot Pro swivel seat on its 42 in adjustable track, the integrated SpringBlade rudder, the 13 in x 15 in gasketed bow hatch and below-deck storage, the midship grab rail and the Power Link install points. The difference is propulsion: the X-Range Pedal Drive is fitted only on the configuration that names it and is otherwise a separate purchase. No motor, battery, wiring, fish finder or transducer is included with either build.

What seat does the Bonafide XTR140P use, and can it be fished tandem?

The Bonafide XTR140P Fishing Kayak carries the Pivot Pro swivel seat on a 42 in adjustable track, so you can slide the seat fore and aft to trim the boat and swing it to face a fish rather than twisting against it. Bonafide lists the hull as convertible to a tandem angler setup using the Pivot Pro swivel. No second seat is published as included, so ask us before you plan on fishing two and we will confirm what a tandem setup needs.

What does motor-ready mean on the Bonafide XTR140P?

Motor-ready on the Bonafide XTR140P Fishing Kayak describes what is built into the hull, not what is in the box. The hull provides multiple motor mounting locations, foot-steering capability for stern motors and Power Link install points at bow, midship and stern for wiring. No motor, battery or wiring is included in either configuration, and you can browse compatible kayak motors and drive systems separately. Bonafide publishes no horsepower or thrust rating for this hull; the 725 lb capacity figure is not one. Tell us the motor you are considering and we will check it before you order.

Can a fish finder and transducer be installed on the Bonafide XTR140P?

The Bonafide XTR140P Fishing Kayak is provisioned for electronics from the factory. There are multiple transducer mounting options at the midship scupper and the stern, monitor mount locations at the side rail and the forward deck, and Power Link install locations at bow, midship and stern so wiring runs cleanly instead of across the deck. The midship grab rail also takes drop-in sonar. The unit, transducer and battery are all separate purchases.

What storage and rigging does the Bonafide XTR140P have?

The Bonafide XTR140P Fishing Kayak carries a high-volume 24 in x 15 in x 9 in below-deck compartment and a 13 in x 15 in gasketed internal bow hatch built to shed waves. The midship grab rail system doubles as the rigging backbone for sonar, accessories and rod storage along the rail. There are two dedicated stowage locations for the X-Range Pedal Drive, one under the deck platform and one at the stern for longer trips.

How should the 185-pound Bonafide XTR140P be transported and stored?

The Bonafide XTR140P Fishing Kayak is 14 ft long, 40 in wide, 170 lb as a fitted hull and 185 lb fully rigged, which puts it beyond comfortable one-person roof loading and makes a trailer worth costing in. If you do rack it, confirm the vehicle and rack are rated for that weight and width, and get help lifting. Store and transport it flat and supported, with straps kept snug rather than cinched down. Bonafide excludes damage caused by improper storage or transportation, including the use of ratchet straps and winching the boat onto a trailer.

Will a motorized Bonafide XTR140P need to be registered?

The Bonafide XTR140P Fishing Kayak is provisioned for a motor from the factory, so settle registration before the first launch rather than at the ramp. Registration, titling and safety-equipment requirements depend on the state where a motorized kayak is used, so confirm them with the relevant state boating agency. Pedal-only use is treated differently from motorized use in many states, which matters if you intend to add power later. Tell us how you plan to rig it and we will help you work through the list.

What warranty coverage applies to the Bonafide XTR140P?

The Bonafide XTR140P Fishing Kayak carries split coverage under Bonafide’s published warranty terms. The hull has a limited lifetime warranty against manufacturing defects for the original retail customer plus a five-year warranty against normal wear and tear, and components are covered for one year from the original date of purchase. Registration within fourteen days of purchase and proof of purchase are both required for a claim. Normal wear and color discoloration, alterations, improper storage or transportation including ratchet straps, winch damage, and rental or commercial use are excluded. Contact Eco Fishing Shop if you need help registering the kayak or assembling a claim.

Still have questions? Message our Chat, call us at 844-987-5777 or email [email protected]. Shipping, delivery and other questions can be answered on our FAQs page.

Your Satisfaction with Bonafide is Guaranteed:

• Color of Hull May Vary Slightly From Photos
• Limited Lifetime Hull warranty against manufacturing defects.
• 5-Year Hull Warranty against normal wear and tear
• 1-Year Limited Componant Warranty
• Damage Free Shipping